Shrink wrap recycling made easy!

Preparing your shrink wrap for recycle is much easier than you might think. Thanks to Dr. Shrink there is a simple and smart way to handle your shrink wrap recycling. Whether you have one boat or an entire marina's worth, Dr. Shrink has made it a no-brainer to get your wrap recycled!

The simple steps for removing your shrink wrap cover:

 

  • Step 1 - Cutting the Shrink Wrap

    Cut the shrink wrap just above the perimeter band, going around the entire boat. This can easily be done with a Dr. Shrink Wrap n' Strap Knife or Professional Film Knife.

  • Step 2 - Removing the Cover

    After removing all vents, zipper doors, strapping and buckles; begin removing your shrink wrap cover. Try to keep the shrink wrap as clean as possible.

  • Step 3 - Stuffing the Bag

    Stuff your shrink wrap into an EZ-Fill Bag to be picked up for recycle. While waiting for your shrink wrap to get picked up, keep it in a dry location. If storing the bags outside, turn sealed bag upside down until pick up.

Recycling your shrink wrap is a no-brainer!

Register to participate in the Recycling Run!

Recycling Run Program

Copyright Dr. Shrink 2014 All Rights Reserved